Steel Secure Economy Store – 2184mm x 3778mm x 2198mm

In stock

1 pieces
£3,680.29
Total:
£3,680.29
2 - 3 pieces and save 4%
£3,680.29
£3,533.08
Total:
4 - 9 pieces and save 6%
£3,680.29
£3,459.47
Total:
10+ pieces and save 10%
£3,680.29
£3,312.26
Total:
x
25 People watching this product now!

Payment Methods

The side and roof panels are manufactured from cold rolled corrugated galvanised Steel and for additional strength the unit has a structural frame which is fitted at each end and the centre of the unit. The double doors, fitted with 3 upper and 3 lower vents in each door, are located in one of the “short” sides of the unit and are secured with a Kale mortis lock with cylinder (152 R). Inside the unit is fitted with two sets of shelves (60 kg/shelf distributed load) on each of the “long” side.

The sump is manufactured from structural grade galvanised Steel and is fitted with base plinths to keep the underside out of contact with the ground.

NOTES: This unit will be delivered by an articulated vehicle, therefore please ensure that a vehicle of this size can access your premises before ordering and advise us accordingly. You will require an appropriate size/capacity forklift truck to offload this item from the delivery vehicle. Our standard delivery doesn’t include any offloading.

The unit must be positioned on a solid level surface, ideally concrete of circa 150mm in depth and 100mm bigger overall than the unit. The purpose of this is to ensure the unit does not settle unevenly when loaded.

External size Internal size Sump capacity Colour Tare weight
2184mm L x 3778mm W x 2198mm H 2018mm L x 3690mm W x 1935mm H 727ltr Galvanised Silver 815kg

Please check all orders upon arrival. If there is an issue with your order, we need to be notified within 24 hours of receipt.

Orders placed after 2 pm will be shipped the following day.

Free Shipping
All products include free shipping to the UK mainland. This is a 3-7 day service. Unless stated otherwise.

24-48-Hour Delivery – £18+vat
24-48 Hour delivery is available for all orders. Orders placed on Fridays will be delivered the following Tuesday. Applies to orders placed before 12pm.

Highlands & Islands – £35+vat
Orders going to non-UK mainland will incur a charge. Delivery service is 5-10 days.

Locations that show no shipping option at checkout will need to be quoted. You can call 0203 916 5283. Or contact us here.

Please note. Large items will require a fork truck to be removed from the lorry/van.

Customer Reviews

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

The industry standards are the 110% and 25% rules. The 110% rule is applicable where there is only 1 container stored inside the bund, in this situation the calculation is simple, the bund needs to have a capacity of at least 110% of the primary containment volume.

All oil containers must be sufficiently bunded The bund must hold 110% of the capacity of the largest container or; 25% of the total capacity stored, whichever is the greater If a single drum is being used, a drip tray can be used which holds 25% of the capacity.

ISO 14000 comprises a set of standards developed by The International Organisation for Standards (ISO) relating
to environmental management systems. (EMS). Within these standards ISO 14001 and ISO 14004 detail particular
aspects that should be present in an EMS. Companies and organisations can establish individual EMS by adapting the
standards to address issues such as spill control. This could involve putting the relevant equipment in place to respond
to spills and leaks to limit damage and control, particularly to the environment.

ISO standards require organisations to establish and maintain a programme to manage environmental issues, provide
and document training for personnel whose work may significantly effect the environment and establish procedures for
prevention of and response to accidents and emergency situations where spills could have an impact.

Compliance

Section 4.4.7 (Emergency preparedness and response) of ISO 14001 requires: “The organisation shall establish and
maintain procedures to identify potential for and respond to accidents and emergency situations, and for preventing and
mitigating the environmental impacts that may be associated with them.”

Spill Kits are one method of stocking the absorbent supplies necessary to respond to accidental releases such as
overfilling of containers, hose and pipe failures, tank breaches or any other spills that may occur on site and could
cause harm to the environment. Spill berms and drain covers are also available to stop spills entering drains or sensitive
areas.

Correct use of spill response materials by trained personnel can significantly mitigate the effect a spill or leak could
have on the outside environment and reduce the overall disruption on site. To be able to respond effectively, spill kits or
absorbents should be positioned at designated locations such as liquid handling, usage and storage areas.

Safe storage

Section 4.3.1 (Planning – Environmental Aspects) of ISO 14001 states: “The organisation shall establish and maintain (a)
procedure(s) to identify the environmental aspects of its activities, products or services that it can control and over which
it can be expected to have an influence, in order to determine those which have or can have a significant impact on the
environment.”

Appropriate storage of industrial liquids on spill containment equipment can prevent environmental damage caused
by accidental releases from containers. These spillpallets and workfloors can be used in raw material storage areas,
product development areas, manufacturing areas, laboratories, together with waste collection and storage areas. Account
should also be taken of hazardous materials, such as flammable liquids, corrosives or reactive materials; these may need
additional, special precautions.

Maintain and improve

Section 4.3.4 (Planning – Environmental management programmes) requires: “The organisation shall establish
and maintain (a) programme(s) for achieving its objectives and targets.”

To achieve and retain certification organisations must create goals for environmental performance. Key activities in
which an organisation can significantly improve their impact on the environment are waste minimisation and recycling
where the amount of solid waste destined for disposal reduction can be reduced.

Another way of reducing waste is to use contained absorbents such as pads and socks instead of loose granular
absorbents. In addition drum funnels can assist with collection of liquids for recycling whilst also reducing emissions to
air from containers used for recycling.

ISO 14000 standards exist to help make the development, manufacturing and supply of products and services safer,
cleaner and more efficient. An international set of standards also assists companies trade with each other without the
need to interpret individual, different environmental standards.

Organisations pursuing and having achieved ISO 14001 certification demonstrate a high regard for our fragile world and
how their activities may affect it. They provide a leading example to others seeking to help preserve and improve our
environment.